MVI56E-FLN ♦ ControlLogix Platform
Start Here
FA Control Network Ethernet Communication Module
User Manual
ProSoft Technology, Inc.
Page 11 of 155
1.2
System Requirements
The MVI56E-FLN module requires the following minimum hardware and software
components:
Rockwell Automation ControlLogix
®
processor (firmware version 10 or
higher), with compatible power supply, and one free slot in the rack for the
MVI56E-FLN module. The module requires 800 mA of available 5 Vdc power
Rockwell Automation RSLogix 5000 programming software
Rockwell Automation RSLinx
®
communication software version 2.51 or higher
ProSoft Configuration Builder (PCB) (included)
ProSoft Discovery Service (PDS) (included in PCB)
Pentium
®
II 450 MHz minimum. Pentium III 733 MHz (or better)
recommended
Supported operating systems:
o
Microsoft Windows 10
o
Microsoft Windows 7 Professional (32-or 64-bit)
o
Microsoft Windows XP Professional with Service Pack 1 or 2
o
Microsoft Windows Vista
o
Microsoft Windows 2000 Professional with Service Pack 1, 2, or 3
o
Microsoft Windows Server 2003
128 Mbytes of RAM minimum, 256 Mbytes of RAM recommended
100 Mbytes of free hard disk space (or more based on application
requirements)
256-color VGA graphics adapter, 800 x 600 minimum resolution (True Color
1024 x 768 recommended)
Note:
The Hardware and Operating System requirements in this list are the
minimum recommended to install and run software provided by ProSoft
Technology
®
. Other third party applications may have different minimum
requirements. Refer to the documentation for any third party applications for
system requirements.
Note:
You can install the module in a local or remote rack. For remote rack
installation, the module requires EtherNet/IP or ControlNet communication with
the processor.
