MVI56-BDW
♦
ControlLogix Platform
Reference
BARDAC Drive Web Interface
Page 56 of 82
ProSoft Technology, Inc.
September 4, 2008
5.1.3 Hardware
Specifications
Specification Description
Backplane Current Load
800 mA @ 5 V DC
3mA @ 24V DC
Operating Temperature
0 to 60°C (32 to 140°F)
Storage Temperature
-40 to 85°C (-40 to 185°F)
Shock 30g
Operational
50g non-operational
Vibration: 5 g from 10 to 150 Hz
Relative Humidity
5% to 95% (non-condensing)
LED Indicators
Module Status
Backplane Transfer Status
Application Status
Serial Activity
Application port (Ethernet)
Ethernet Port (Ethernet modules) 10/100
Base-T
RJ45 Connector
Link and activity LED indicators
Electrical Isolation 1500 V rms at 50 Hz to 60 Hz for 60 s,
applied as specified in section 5.3.2 of IEC 60950: 1991
Ethernet Broadcast Storm Resiliency = less than or equal
to 5000 [ARP] frames-per-second and less than or equal
to 5 minutes duration
Shipped with Unit
RJ45 to DB-9M cables for each port
6-foot RS-232 configuration cable
Debug/Configuration port (CFG)
CFG Port (CFG)
RJ45 (DB-9M with supplied cable)
RS-232 only
No hardware handshaking
5.1.4 Functional
Specifications
A client configured as a Bardac master device on the MVI56-BDW module will
actively issue Bardac-DW commands to other nodes on the Bardac-DW network.
One hundred commands are supported for each client. The ControlLogix
processor can be programmed to control the activity on the client by actively
selecting commands from the command list to execute, or issuing commands
directly from the ladder logic.
Some of the general specifications include:
Support for the storage and transfer of up to 5000 registers to/from the
ControlLogix processor's controller tags
User-definable module memory usage
Ability for the user to define commands to set or get parameters from the
Bardac device
10/100 Base-T Ethernet compatible interface
