Module Configuration
MVI56-BDW
♦
ControlLogix Platform
BARDAC Drive Web Interface
ProSoft Technology, Inc.
Page 37 of 82
September 4, 2008
2.2.4 Commands Supported by the Module
The format of each command in the list is dependent on the BARDAC DW
Function Code being executed. The tables below list the functions supported by
the module:
Function Code
Definition
Supported in Client
0
Get (read data)
X
1 Set
(write
data)
X
Each command list record has the same general format. The first part of the
record contains the information relating to the communication module and the
second part contains information required to interface to the BARDAC-DW
UDP/IP Server device.
2.3 Download
the
Project to the Module
In order for the module to use the settings you configured, you must download
(copy) the updated Project file from your PC to the module.
To Download the Project File
1
In the tree view in ProSoft Configuration Builder, click once to select the
MVI56-BDW module.
2
Open the
Project menu,
and then choose
Module
/
Download
. The program
will scan your PC for a valid com port (this may take a few seconds). When
PCB has found a valid com port, the following dialog box will open.
3
Choose the com port to use from the dropdown list, and then click the
Download button.
