Pro'sKit SS-956, User Manual

Page: 9 / 32

8
Fig. 17
5. After removing SMD components, remove residual soldering solder tin with desoldering
tool.

SMD Rework Operation Instructions
1. Apply proper quantity of solder paste and install the SMD components on PCB.
2. Refer to Fig. 18 to preheat components
Fig. 18
3. Heat the lead frame evenly (Fig. 19)
Fig. 19
4. Cleaning
When soldering is completed, clean the residual flux from the board with appropriate cleaner.
How to use suction pen
1) Choose a proper suction cup according to the weight (less than 100g) and size of object. Install
the cap with the suction pen.
Fig.20
2) Put the suction cup horizontally with the surface of the adsorbed object. Cover the hole on the
suction pen, and the object will be absorbed.
Fig.21
3) Move out the absorbed object, and then open the hole on the suction pen to release the object.
4) If need to use suction pen only, put the hot air gun on holder, and rework station will be in the auto
sleep mode. Press the UP
▲
or Down button
▼
to adjust air speed(air speed range from