21
The TV first programs all channels for
ANT A
input and
then all channels for
ANT B
input (even with one antenna
input connected).
5
When the TV finishes cycling, you can check which
channels are in memory by pressing the
CHANNEL
up or
down button. Your set will stop on each of the channels in
memory.
Your TV will remember which channels are in memory
until you erase them or until you autoprogram channels
again. Extended power failures have no effect on the
channel memory.
Programming Channel Memory
The quickest way to program the Channel Memory is
to use the
AUTOPROGRAM
function. Your TV
automatically cycles through and places active
channels into Channel Memory.
Follow the instructions below to autoprogram channels,
then add or erase individual channels as desired.
AutoProgramming Channels into Channel Memory
with or without remote
1
Connect home antenna(s) or cable-TV to your set.
2
Repeatedly press the
MENU
button to select
SETUP MENU
and press + to display the setup functions.
3
Repeatedly press the
MENU
button until the
AUTOPROGRAM
menu is selected.
4
Press or – to begin programming. The TV will
cycle thru available channels in your area and place active
channels into memory.
Audio Menu
Mute
Video Menu
Setup Menu
Chan Label
Parental Ctrl: Off
Set Alarm
Chan Ctrl: Normal
Autoprogram
Autoprogramming
Chan Label
Parental Ctrl: Off
Set Alarm
Chan Ctrl: Normal
10:44 18
Autoprogramming
Chan Label
Parental Ctrl: Off
Set Alarm
Chan Ctrl: Normal
10:44 18
Autoprogramming
Chan Label
Parental Ctrl: Off
Set Alarm
Chan Ctrl: Normal
10:46 17
Par
ental Contr
ol
AutoPr
ogramming
