ProScan Monitor/Receiver Owner'S Manual Download

Page: 19 / 60

Pressing

moves down the screen (one item per press).

The setup menu will automatically disappear from the
screen if you do not press + or – within a few seconds.

Via remote control, your TV will “remember” which
function you displayed last, even after the menu has
disappeared from the screen. So, if you want to adjust the
same function again, simply press the + or – button on the
remote control. The last function you adjusted will
reappear on the TV screen.

CLOSED CAPTIONING

lets you display the audio portion of a program

as text on the TV screen. Details are on page 16.

SLEEP TIMER

lets you program your TV to turn itself off after a

certain period of time. This is useful whenever you want to
watch TV for a selected length of time before going to sleep.
Press the + or – button to select the length of time you want the
TV to stay on. Details are on page 17.

The

ALARM

function lets you program your TV to turn on and/or

off at the time you choose. Details are on page 18.

CHANNEL LABELING

lets you program names (or labels) for the

channel numbers. The names you select will then appear on the
screen whenever the channel number is displayed. Details are on
page 19.

The

PARENTAL CONTROL

feature lets you lock out any channels

between 1 and 99 that you don’t want your children to watch.
Pr or – switches this function from

OFF

. When this

function is set to

, channels that have been locked out with the

CHAN CTRL

function cannot be viewed. When this function is set

OFF

, all channels can be viewed. Details are on page 20.

The

CHANNEL CONTROL

function works hand-in-hand with the

PARENTAL CONTROL

function. It lets you select the channels

between 1 and 99 that you want to lock out. First select the
channel number you want to lock out and then press + or – to
change this function from

NORMAL

LOCKED

. When the

PARENTAL CONTROL

function is set to

, the channels you locked

with this function cannot be viewed. Details are on page 20.

AUTOPROGRAM

commands the TV to automatically cycle through

all channels and place only active channels for your area in its
channel memory. Pressing the

CHANNEL

up or down buttons will

then only stop on active channels. Details are on page 21.

CHANNEL MEMORY

is the list of channels the TV will stop on when

you press the

CHANNEL

up or down button. This display lets you

add or erase channels as desired. Details are on page 21.

ANTENNA A

– Because your TV has two separate antenna inputs

on the back labeled

ANT A

and

ANT B

, you can connect two

different signal sources, if desired. By pr to change this
display, you can switch back and forth between the two signal
sources. Each time you press +, the antenna input will change.
Details are on page 24.

The

CABLE

AIR

function tells your TV whether you have a cable-

TV system or a home antenna connected to the TV. Your TV is
so automatic that you will probably never need to change this
function. When your TV autoprograms, it automatically adjusts
the

CABLE/AIR

setting for you. If you should ever need to override

the automatic setting, press + or – to change it.

The

VCR

1 CHANNEL

function lets you program to which channel the

TV will automatically tune when you press the

VCR1

button on

the remote. Details are on page 23.

The