Pronar T680
SECTION 2
2.8
FIGURE 2.1
Method of placing chocks
(1) wheel chock, (2) wheel of rear axle
•
Do NOT move off or drive when load box is raised.
•
Before moving check that the trailer is correctly hitched to the tractor (in particular
check security of hitching pin).
•
Chocks (1) should be placed only under one wheel (one chock in front of the
wheel, the other behind the wheel - figure (2.1)). Chocks should not be placed
under the front axle wheels.
•
Prior to moving off, make sure that pins connecting the load box with the lower
frame as well as the wall pins are secured against falling out using cotter pins.
Check if the rear wall slide gate is secured. Check that all walls and extensions
are properly closed. Check correctness of the securing of linking cables and a
security of cable release mechanism.
Summary of Contents for T680
