Pronar T680
SECTION 5
5.40
attach centre apex (3) to the middle stakes,
screw down ridge pipe (4),
screw down two rim pipes (5),
place tarpaulin cover (7) so that it rests on the limiters,
secure the tarpaulin cover with grabs (13) riveted to the right wall of load box,
unroll tarpaulin cover using rolling beam (6). Install tensioners (8) on the beam
and, using hooks (11), attach tensioners to catches (12) located on the left
side of the trailer.
tighten tarpaulin cover and secure the front and rear part of the tarpaulin cover
to catches (16) using expanders (14).
Disassembly of the frame and tarpaulin cover should be performed in reverse order.
DANGER
Assembly and disassembly of the frame should be carried out with the use of appropriate
platforms, ladders or when standing on a ramp. These tools must be in good condition to
fully protect the persons working on them against falling. Work should be performed by at
least two persons. Exercise particular caution.
Summary of Contents for T680
