SECTION 2
Pronar T680
2.7
•
Do NOT jerk the trailer forwards if load is bulky or reluctant to pour and does not
unload.
•
After completed unloading, ensure that the load box is empty.
•
Do NOT drive with the load box raised.
•
When closing or opening the rear grain chute gate or the walls and extensions
take particular care to avoid crushing fingers.
•
Do NOT go or place hand between opened walls and load box.
•
Lower the load box before proceeding to deal with a malfunction. If it is necessary
to raise the load box, it should be tipped to the side and secured against dropping
with the aid of load box support. The load box may not be loaded. The trailer must
be hitched to the tractor and secured with chocks and parking brake.
2.1.6 TRANSPORTING THE MACHINE
•
During travel on public roads comply with the road traffic regulations and transport
regulations in force in a given country, in which the trailer is used.
•
Do not exceed the maximum design speed.
•
Adjust speed to road conditions.
•
The machine must NOT be left unsecured. When not connected to the tractor, the
trailer must be immobilised with parking brake and protected against rolling with
chocks or other objects without sharp edges placed under the front and back
trailer wheels.
Summary of Contents for T680
