PRONAR T386, Operator'S Manual, Page: 92 / 162

Pronar T386 SECTION 4
4.24
Extend the load box interlock.
Press and hold the push-button for extending
the load box interlock.
When indicator light (16) lights up, figure
(4.8) , keep the push-button pressed for 2-3
seconds.
Extend the rear bumper (if the
load box projects more than
400mm).
Press and hold the push-button for extending
the rear fender until the required position of
the rear fender is achieved.
The maximum distance between the rear
fender and the rearmost point of the vehicle
(load box) should not exceed 400mm.
Position of the fender is defined by indicator
lights (4), (5), (6) on the control panel –
figure (4.8).
Place slow-moving vehicle plate on the rear wall of the load box.
WARNING
Make sure that the electrical cables will not be damaged by moving parts of the trailer and
the tractor during operation. If necessary, secure the cables in a proper manner.
The central frame in "hook trailer" position can be operated only when the rear fender is
completely folded and the load box lock is unlocked - indicator lights 4, 10 and 15 must be
ON – figure
(4.8).
In the event of pulling the load box, which is not standing on hard ground, it is permissible to
reverse the trailer after raising the load box to a height enabling it to be pulled in. Soft ground
preventing easy rolling of the load box rollers significantly hinders the load box pulling in