PRONAR T386, Operator'S Manual, Page: 73 / 162

SECTION 4 Pronar T386
4.5
After completion of test drive, check tightness of wheel and drawbar eye nuts.
4.2 HOOK SETTING ADJUSTMENT
The hook trailer enables connection of load boxes with hitching eye at the height of 1 570
mm according to DIN 30722-1 standard) or (1 450 mm according to SS 3021 standard).
Changing height of hook should be performed by two persons. Self-locking nuts M20-8
should be replaced with new ones and tightened using appropriate tightening torque
according to table 5.9 (TIGHTENING TORQUE FOR NUT AND BOLT CONNECTIONS).
FIGURE 4.1 Hook setting adjustment
(1) hook, (2) bolt connection