PRONAR T386, Operator'S Manual, Page: 90 / 162

Pronar T386 SECTION 4
4.22
WARNING
Selection of the trailer's working mode is only possible when the tipping frame is
retracted to resting position.
If the hook frame is not completely shifted, the trailer will work in "tipper" operation mode.
Swing the central frame
Press and hold the push-button for rising the
tipping frame to the position in which the
hook is located at the height of the load box
hitch
The suspension interlock cylinders will be
automatically extended.
Reverse the trailer to such a position in which the load box can be hooked, If
necessary, correct the hook position according to chapter 4.2.
WARNING
In "hook trailer" position, after rising the central frame, the hook frame does not shift.
Pulling the load box onto the trailer should be carried out on flat, even and level ground.
While connecting load box arrange it in such a way that the longitudinal axis of the trailer
is aligned with the longitudinal axis of the load box. If not, the load box longitudinal
members of the frame may not fit on the trailer rollers lengthwise. While pulling the load
box onto the trailer, it is necessary to observe whether its longitudinal members are
properly supported on the trailer guide rollers. If necessary, stop pulling the load box, put
the load box aside and position the trailer once again in a proper manner for pulling the
load box.
DANGER
Bystanders must NOT be in the immediate vicinity of the trailer when pulling the load
box onto the trailer.
Take particular care while working near electric power lines.
When disconnecting the load box from the trailer, the drawbar hitching eye and tractor
hitch are subjected to great loads.