PRONAR T386, Operator'S Manual, Page: 104 / 162

Pronar T386 SECTION 4
4.36
Lock the load box.
Press and hold the push-button for
extending the load box interlock.
When indicator light (16) lights up, figure
(4.8) , keep the push-button pressed for
2-3 seconds.
Raise the tipping frame
together with the load box.
Press and hold the push-button for rising
the tipping frame until the load box is
completely unloaded.
The suspension interlock cylinders will
be automatically extended.
WARNING
If the trailer is in "tipper" mode (indicator light (9) is ON – figure (4.8)) and the load box
interlock is withdrawn (indicator light (15) is ON - figure (4.8)), the push-buttons for rising
and lowering the tipping frame do not work.
If in the initial phase, the tipping frame can not raise the load box, lower the tipping frame
completely, withdraw the load box interlock, shift the load box to the rear by means of the
hook frame, extend the load box interlock and raise the tipping frame with the load box
again.
Remove remains of load from the load box edges and the trailer components.
Close the rear wall of the load box. If the load box is equipped with the rear
hydraulic wall, use the control panel.
Press and hold the push-button (17) or (18) - figure (4.8) until the load
box wall is completely opened.