PRONAR T386, Operator'S Manual, Page: 80 / 162

Pronar T386 SECTION 4
4.12
4.3.1 OPERATION OF SUPPORT WITH MECHANICAL GEAR
Proper height of drawbar eye in relation to tractor hitch is set using the support with
mechanical gear - figure (4.4).
FIGURE 4.4 Support with gear
(1) support body, (2) internal pipe (3) lower foot, (4) gear crank, (4) pin, (A) position – gear I
(speed under load), (B) position – II gear (high speed), (C) neutral position, (D) lowering the
support, (E) raising the support
Raising the support
Set support crank (4) in position (B) or (A).
Position (A) is used for rising and lowering the support under load.
Position B is used for fast rising or lowering the support in order to
reduce the distance between the support foot and the ground, in
unloaded trailer.
Turn the crank in direction (E) to raise the support so that the foot (3) does not
touch the ground.
Set the crank in neutral position (A).