![background image](http://html.mh-extra.com/html/promise-technology/vtrak-n1008/vtrak-n1008_product-manual_1617267043.webp)
40
Promise
Technology
VTrak N1008
Types of Network Bonding
•
mode=0 (balance-rr)
This mode is based on Round-robin policy and it is the default mode. This
mode offers fault tolerance and load balancing features. It transmits the packets in Round robin
fashion that is from the first available slave through the last.
•
mode-1 (active-backup)
This mode is based on Active-backup policy. Only one slave is active
in this band, and another one will act only when the other fails. The MAC address of this bond is
available only on the network adapter part to avoid confusing the switch. This mode also provides
fault tolerance.
•
mode=2 (balance-xor)
This mode sets an XOR (exclusive or) mode that is the source MAC
address is XOR’d with destination MAC address for providing load balancing and fault tolerance.
Each destination MAC address the same slave is selected.
•
mode=3 (broadcast)
This method is based on broadcast policy that is it transmitted everything on
all slave interfaces. It provides fault tolerance. This can be used only for specific purposes.
•
mode=4 (802.3ad)
This mode is known as a Dynamic Link Aggregation mode that has it created
aggregation groups having same speed. It requires a switch that supports IEEE 802.3ad dynamic
link. The slave selection for outgoing traffic is done based on a transmit hashing method. This may
be changed from the XOR method via the xmit_hash_policy option.
•
mode=5 (balance-tlb)
This mode is called Adaptive transmit load balancing. The outgoing traffic
is distributed based on the current load on each slave and the incoming traffic is received by the
current slave. If the incoming traffic fails, the failed receiving slave is replaced by the MAC address
of another slave. This mode does not require any special switch support.
•
mode=6 (balance-alb)
This mode is called adaptive load balancing. This mode does not require
any special switch support.
Network Interface Bonding
Network bonding is a process of combing or joining two or more network interfaces together into a single
interface. Network bonding offers performance improvements and redundancy by increasing the network
throughput and bandwidth. If one interface is down or unplugged the other one will work. It can be used
in situations where you need fault tolerance, redundancy or load balancing networks. In Linux, a special
kernel module named bonding is used to connect multiple network interfaces into a single interface. Two
or more network interfaces can be connected into a single logical “bonded” interface. The behavior of the
bonded interfaces depends on the type of bonding method used.