Promise Technology VTrak N1008 Product Manual Download

Page: 6 / 60

Introduction

Product

Manual

System

Power supply

100 ~ 240V AC, 60 ~ 50Hz, 8A Max, 350W

System Fan

System fan: 2700 RPM.12V

Hardware

monitoring

Temperature, Enclosure, Physical drives, Logical drives, RAID controller

Temperature

Operating: 5° ~ 35° C
Non-operating: -40° ~ 70° C

Humidity

Operating: 10% ~ 95% non-condensing
Storage: 5% - 95% non-condensing

Dimensions

310 mm x 187 mm x 245 mm

Weight

16 Kg with HDD installed

General

CPU

Intel CPU i5-8500.3.0 GHz. 9MB Cache.65W.6 Cores

Memory

32GB

Memory Slot

2 x Long-DIMM DDR4

Drives

Shipped with eight 3.5 inch 7200 rpm SATA Hard Disk Drive (HDD) Modules mounted

in the drive bays.

Drive Support

3.5” & 2.5” ( SATA 6Gb/s) HDD/SSD

RAID

RAID level support: RAID 0, 1, 5, 6, 10, 50, 60

OS Support

macOS 10.15 or newer, Windows 10 or newer

Boost

NVMe Cache 2TB x 2

Interface

LAN Ports

Share Ports:

10G Base-T : 4-Port / 10G SFP+ : 4-Port / 25G SFP28 : 2-Port

Management:

2 Ports 1G Base-T

USB Ports

USB2.0 x 2 (Back) & USB3.2 x 4 (Back)

Graphics

HDMI x 1; VGA x 1

Hardware

The following section provides a summary of the front and back panel hardware features of VTrak N1008.

Front Panel

The front panel of VTrak N1008 enclosures provide access to drives carriers. Defective drives can be

replaced without interruption of data availability to the host computer. If so configured, a hot spare drive

will automatically replace a failed drive, securing the fault-tolerant integrity of the logical drive. The self-

contained hardware-based RAID logical drive in the VTrak N1008 provides maximum performance in a

compact external enclosure.

The VTrak N1008 system power button located on the front includes the Power status LED.

Drive carrier LED behavior on VTrak N1008

LED Description

Power

Lights BLUE to indicate the system is pow-

ered on. Blinks BLUE in shutdown mode.

Drive Status

Each drive carrier has two LEDs on the

right side of the front, the Drive Status

LED located above the Activity LED. The

Drive Status LED displays BLUE when

a drive is configured and working prop

erly. When the lights are RED the HDD

requires manual replacement. ORANGE

indicates background RAID activity on this

particular HDD, no user action is required.

Drive Activity

Steady BLUE when HDD link is estab-

lished, flashes BLUE during drive activity.

VTrak N1008 Front Panel

Power button

Drive Status

one LED per carrier

Activity

one LED per carrier

Summary of Contents for VTrak N1008




























































Search results

Summary of Contents for VTrak N1008

Reviews:

Related manuals for VTrak N1008

Brands by name

Popular brands

Promise Technology VTrak N1008, Product Manual

Search results

Summary of Contents for VTrak N1008

Reviews:

Related manuals for VTrak N1008

Brands by name

Popular brands