Promise Technology VTrak N1008 Product Manual Download

Page: 49 / 60

Promise

Technology

VTrak N1008

Device Settings

Click the Settings link in the Device menu to view the basic settings menu for the device.

The actions available in the Basic Settings menu are:

•

Allow detection using PROMISE Utility Pro

Enabled by default. Use this to enable or disable autodetection for PROMISE Utility Pro on the

network. PROMISE Utility Pro uses autodetection to locate available VTrak devices on the 10G

network.

•

Alert Sound (Sound/Mute)

Enabled by default. Use this to enable or disable the audible alarm on the VTrak.

•

System Date and Time

Click the Edit button to change Date and Time settings.

•

Restore Factory Default

Click on Reset to restore system settings to factory default settings. Note that if a reset is

conducted, all data in the Home folder will be moved to the administrators Home folder, and all

Members and permission settings will be lost.

Note that you can backup settings for Members and

Storage settings using the Import/Export settings menu in the Administration tab.

Device Settings menu

Summary of Contents for VTrak N1008




























































Search results

Summary of Contents for VTrak N1008

Reviews:

Related manuals for VTrak N1008

Brands by name

Popular brands

Promise Technology VTrak N1008, Product Manual

Search results

Summary of Contents for VTrak N1008

Reviews:

Related manuals for VTrak N1008

Brands by name

Popular brands