Promise Technology FastTRAK66 User Manual Download Page 8

Page: 8 / 73

Introduction

Features

Benefits

Complies with PCI v2.1 Local Bus standard

Compliant with PCI IDE Bus Master
standard. PCI IDE Bus Master support for
Windows95, Windows NT 3.5x, 4.0

Tested compatiblity to coexist with
Mainboards that have integrated IDE
controllers

Compatible with Ultra ATA/66, Ultra
ATA/33, EIDE and Fast ATA-2 drives
supporting multi-word DMA

Features LBA and Extended Interrupt13
drive translation in controller onboard BIOS

Provides highest level of hardware
compatibility.

Provides 32-bit I/O, IDE Bus Master, and
Ultra ATA performance for optimal system
performance.

Improves system performance of new and
existing installations including mainboards
with Intel chipsets.

Works with newest and current IDE drive
specifications. Promise engineers
experienced with IDE devices perform
verification testing with major drive
manufacturers and development partners.

Breaks capacity barriers for support of drives
greater than 8.4GB in capacity. Offers
flexible storage options for space demanding
applications.

Compatibility

1-3

Summary of Contents for FastTRAK66










































































Search results

Summary of Contents for FastTRAK66

Reviews:

Related manuals for FastTRAK66

Brands by name

Popular brands

Promise Technology FastTRAK66, User Manual

Search results

Summary of Contents for FastTRAK66

Reviews:

Related manuals for FastTRAK66

Brands by name

Popular brands