Promise Technology FastTRAK66, User Manual

Page: 12 / 73

Quick Installation
[ 2 ] Set Mainboard CMOS Setup
No changes are necessary in the Mainboard CMOS Setup for resources or drive
types. Since FastTrak66 is a PCI Plug-n-Play (PnP) device, the Interrupt and Port
address resources are automatically assigned by the Mainboard’s PCI PnP BIOS.
For the FastTrak66 to be the bootable IDE controller, confirm in the mainboard’s
Standard CMOS Setup that the drive types (for
hard disk drives) are set for “Not
Installed” or “None”. Or use “Boot to SCSI” option, if this setting is available in the
motherboard’s BIOS. No changes are needed for CD-ROM drives that are attached
to the mainboard IDE controller.
[ 3 ] Configuring FastBuild BIOS Setup
During bootup, the FastBuild BIOS appears on the screen and displays BIOS ver-
sion information.
1) Press <Ctrl-F> to enter the FastBuild utility.
2) Press <1> for Auto Setup.
• Under the “Optimize Array for” option, choose the “Performance”, “Fault
Tolerance”, or “Capacity”.
• For the “Typical Application Usage” option, select the appropriate setting
with the <Space> key.
See Chapter 4 for details on FastBuild Configuration Setup.
3) Press <Ctrl-Y> to save and “Yes” to save and reboot the system.
NOTE:
the
disk array will be seen as one physical drive by the operating system.
Drives types are identified as
“Not Installed” or “Boot to
SCSI” (if available)
System Date Jan 1 1999
System Time 0 9 : 0 0 : 0 0
Floppy Options
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
Language
Boot Options
Video MOde
Mouse
Base Memory
Extended Memory
BIOS Version
Press Enter
Not Installed
Not Installed
Not Installed
Not Installed
English (US)
Press Enter
EGA / VGA
Installed
6 4 0 K B
3 1 7 4 4 K B
1 . 0 0 . 0 0 . 0 0
Main Advanced Security Exit
2-3