manualshive.com logo in svg

Promise Technology FastTRAK66, User Manual, Page: 35 / 73

Share
Download
Promise Technology FastTRAK66 User Manual Download Page 35

FastCheck

TM

 Monitoring Utility

Array Synchronization

 Access array synchronization using the Array pull-down menu (see above
section). Synchronization is a periodic maintenance procedure for Mirroring
(RAID 1, RAID 0+1) arrays to maintain data consistency on all mirrored drives. In
operation, array synchronization compares data on the mirrored drives for any
differences.  If there are differences detected, data from the primary drive(s) is
automatically copied to the secondary drive(s). This assures that all mirrored
drives will contain the exact information.

To synchronize, choose the Array Tab View, right click the array, and choose “Syn-
chronize” from the context menu. You can also “Schedule the array synchroniza-
tion” under the Options Tab view.

Once Synchronization is selected, you will be asked to “Initialize Synchronize pro-
cess on Array #” by clicking OK.This will initiate the process.

A progress bar will appear at the bottom of the FastCheck Monitoring window.

5-6

Summary of Contents for FastTRAK66










































































Reviews:

No comments