VTrak E-Class Product Manual
144
Managing the Subsystem
Subsystem Management includes the following functions:
•
Setting an Alias for the Subsystem (page 144)
•
Setting Redundancy for the Subsystem (page 144)
•
Running Media Patrol (page 144)
•
Locking or Unlocking the Subsystem (page 145)
•
Setting Subsystem Date and Time (page 145)
Setting an Alias for the Subsystem
An alias is optional. To set an Alias for this subsystem:
1.
From the Main Menu, highlight
Subsystem Management
and press Enter.
2.
Type and alias into the Alias field.
Maximum of 48 characters. Use letters, numbers, space between words
and underscore.
3.
Press Ctrl-A to save your settings.
Setting Redundancy for the Subsystem
This feature applies to Fibre Channel models with dual controllers.
To set redundancy:
1.
From the Main Menu, highlight
Subsystem Management
and press Enter.
2.
Highlight
Redundancy Type
and press the spacebar to toggle between
Active-Active and Active-Standby.
•
Active-Active – Both RAID controllers are active and can share the load
•
Active-Standby – One RAID controller is in standby mode and goes
active if the other fails
3.
Press Ctrl-A to save your settings.
Running Media Patrol
Media Patrol is a routine maintenance procedure that checks the magnetic media
on each disk drive. Media Patrol checks all physical drives assigned to disk
arrays and spare drives. It does not check unconfigured drives.
To start, stop, pause or resume Media Patrol:
1.
From the Main Menu, highlight
Subsystem Management
and press Enter.
2.
Highlight
Media Patrol
and press enter.
3.
Highlight
Start
,
Stop
,
Pause
, or
Resume
and press Enter.
4.
If you chose Stop, press Y to confirm.
Summary of Contents for E310f
