Chapter 4: Management with WebPAM PROe
123
4.
From the dropdown menu the Background Activities tab, select
Start
Migration
.
5.
Highlight physical drives you want in the disk array from the Available list and
press the >> button to move them to the Selected list.
You can also double-click them to move them.
6.
When you are done, click the
Next
button.
7.
Select a new RAID Level, if desired.
8.
To expand the disk array's capacity, check the Expand Capacity box.
9.
If you checked the Expand Capacity box, enter a number into the Capacity
field and select the appropriate unit of measure (MB, GB, TB).
10. Under Capacity Usage, highlight the logical drive whose RAID level you want
to change or whose capacity you want to expand.
11. Click the
Update
button.
The logical drive changes to reflect your choices.
12. Update other logical drives using the same method.
13. When you are done making the changes, click the
Next
button.
14. Click the
Submit
button to begin Migration.
To set Migration priority, see “Making Background Activity Settings” on page 59.
Rebuilding a Disk Array
When you rebuild a disk array, you are actually rebuilding the data on a
replacement physical drive.
Rebuilding Automatically
Normally, a disk array would rebuild itself using a hot disk drive, after going
Critical. However, if the Auto Rebuild function is disabled or no spare drives are
available, you must initiate the procedure.
To enable Auto Rebuild, see “Making Background Activity Settings” on page 59.
To create a spare drive, see “Creating a Spare Drive” on page 135.
For more information, see “Hot Spare Drive(s)” on page 240.
Rebuilding Manually
If a physical drive has failed, identify and replace the drive, then rebuild the disk
array as described below:
1.
Click the Subsystem
icon in Tree View.
2.
Click the Disk Arrays
icon.
3.
Click the Disk Array
icon.
Summary of Contents for E310f
