Promise Technology 150TX2 User Manual Download

Page: 51 / 82

Chapter 4: Installing Software Drivers

Existing Windows NT4.0 Installation

The following section details the installation of FastTrak TX2plus drivers on a
system that has Windows NT4.0 already installed and running.

NOTE: Do not attach the boot drive or any other hard drive to the FastTrak
TX2plus controller card before completing this step.

1. From the Start menu, choose Settings.

2. From the Settings menu, choose Control Panel.

3. Double-click the SCSI Adapters icon. The SCSI Adapters dialog box

appears.

4. Choose Drivers then click Add.

5. In the Install Drivers dialog box, click Have Disk…

6. When Install From Disk appears, insert the FastTrak TX2plus driver diskette

in drive A:.

7. Type

A:\NT4

in the text box window then click OK.

8. When the Install Driver dialog box appears, select

WinNT Promise FastTrak

TX4000/S150 TX Series Controller

then click OK.

9. When the Select SCSI Adapter Option dialog box appears, click Install.

10. After a successful installation, the SCSI Adapter Setup box will show that

the “WinNT Promise FastTrak TX4000/S150 TX Series Controller” has been
installed.

11. Power off your system.

12. If you plan to move the boot drive to the FastTrak card, do it now. Otherwise

reboot.

Removing Driver from Windows NT4.0

1. From Start, choose Setup then choose Control Panel.

2. In Control Panel, choose SCSI Adapter then choose Drivers.

3. Click the Remove button.

4. After successful removal, the SCSI Adapter Setup box will show that the

“WinNT Promise FastTrak TX4000/S150 TX Series Controller” has been
removed.

Summary of Contents for 150TX2



















































































Search results

Summary of Contents for 150TX2

Reviews:

Related manuals for 150TX2

Brands by name

Popular brands

Promise Technology 150TX2, User Manual

Search results

Summary of Contents for 150TX2

Reviews:

Related manuals for 150TX2

Brands by name

Popular brands