Promise Technology 150TX2 User Manual Download

Page: 50 / 82

FastTrak S150 TX2plus User Manual

New Windows NT4.0 Installation

The following details the installation of the FastTrak TX2plus drivers while
installing Windows NT4.0.

1. Start the system installation by booting from the Windows NT disk:

•

Floppy install: boot the system with the Windows NT installation
diskettes.

•

CD-ROM disk install: boot from the CD-ROM disk and press F6 when
the message “Setup is inspecting your computer’s hardware
configuration…” appears.

2. When the Windows NT Setup window is generated, press S to Specify an

Additional Device(s).

3. Press O to select

Other

then press Enter.

4. Insert the FastTrak TX2plus driver diskette into drive A: and press Enter.

5. Choose

WinNT Promise FastTrak TX4000/S150 TX Series Controller

from

the list that appears on screen then press Enter.

6. The Windows NT Setup screen will appear again saying “Setup will load

support for the following mass storage devices:” The list will include WinNT
Promise FastTrak TX2plus Controller.

NOTE: If there are any additional devices to be installed, specify them now.
When all devices are specified, continue to the next step.

7. From the Windows NT Setup screen, press Enter. Setup will now load all

device files and then continue the Windows NT installation.

8. After a successful installation, the SCSI Adapter Setup box will show that

the “WinNT Promise FastTrak TX4000/S150 TX Series Controller” driver
has been installed.

Summary of Contents for 150TX2



















































































Search results

Summary of Contents for 150TX2

Reviews:

Related manuals for 150TX2

Brands by name

Popular brands

Promise Technology 150TX2, User Manual

Search results

Summary of Contents for 150TX2

Reviews:

Related manuals for 150TX2

Brands by name

Popular brands