Promise Technology 150TX2 User Manual Download

Page: 45 / 82

Chapter 4: Installing Software Drivers

Existing Windows XP Installation

After installing the FastTrak S150 TX2plus card and rebooting your system,
Windows XP setup will show a “Found New Hardware” dialog box. Under
Windows XP, “Mass Storage Controller” will be displayed.

1. Insert the FastTrak TX2plus driver diskette into the A:\ drive.

2. Choose

Install the software automatically

and press the Enter key.

3. Choose

WinXP Promise FastTrak TX4000/S150 TX Series

Controller

from

the list that appears on screen, and then press the Enter key.

4. If using a driver that has not been digitally signed by Microsoft, you will be

asked if you want to continue the installation. Click Continue anyway.

5. When the New Hardware Wizard has finished installing the FastTrak

TX2plus software, click Finish.

Confirming Windows XP Driver Installation

1. Right-click on the My Computer icon and select Manage from the popup

menu.

2. From the left panel, select Device Manager.

3. Click the “+” in front of SCSI controllers. “WinXP Promise FastTrak

TX4000/S150 TX Series Controller” should appear.

Summary of Contents for 150TX2



















































































Search results

Summary of Contents for 150TX2

Reviews:

Related manuals for 150TX2

Brands by name

Popular brands

Promise Technology 150TX2, User Manual

Search results

Summary of Contents for 150TX2

Reviews:

Related manuals for 150TX2

Brands by name

Popular brands