Promise Technology 150TX2 User Manual Download

Page: 46 / 82

FastTrak S150 TX2plus User Manual

New Windows 2000 Installation

The following details the installation of the FastTrak TX2plus drivers while
installing Windows 2000.

1. Start the installation:

•

Floppy Install: Boot the computer with the Windows 2000 installation
diskettes.

•

CD-ROM Install: Boot from the CD-ROM. Press F6 after the message
“Press F6 if you need to install third party SCSI or RAID driver”
appears.

2. When the Windows 2000 Setup window is generated, press S to specify an

Additional Device(s).

3. Insert the FastTrak TX2plus driver diskette into drive A: and press Enter.

4. Choose

Win2000 Promise FastTrak TX4000/S150 TX Series Controller

from the list that appears on screen then press Enter.

5. The Windows 2000 Setup screen will appear again saying “Setup will load

support for the following mass storage devices:” The list will include
“Win2000 Promise FastTrak TX4000/S150 TX Series Controller”.

NOTE: If there are any additional devices to be installed, specify them now.
When all devices are specified, continue to the next step.

6. From the Windows 2000 Setup screen, press Enter. Setup will now load all

device files and then continue the Windows 2000 installation.

Summary of Contents for 150TX2



















































































Search results

Summary of Contents for 150TX2

Reviews:

Related manuals for 150TX2

Brands by name

Popular brands

Promise Technology 150TX2, User Manual

Search results

Summary of Contents for 150TX2

Reviews:

Related manuals for 150TX2

Brands by name

Popular brands