promesstec UREG 200, User Manual

Page: 18 / 90

18
promesstec GmbH I Niedersachsenstraße 4 I D- 48465 Schüttorf I Tel.:+49 (0)5923/ 90 229 0 I Fax:+49 (0)5923/ 90 229 29
E-Mail: office@promesstec.com I Internet: www.promesstec.com
4.7 Parameter description
Parameter description
Included in
Base
function
Parameter
Name
Display
Parameter
description
Range
Default
Value
Yes SP1 Set point 1 Low: SP1L High SP1H 100,0 °C
Yes TIME Timer Low: 0 High: 6553,5 min. 0
Yes A1SP Alarm 1 Switching point See table 1.5, 1.6 100,0 °C
Yes A1DV Alarm 1 Difference Low: -200,0 °C High: 200,0°C 10,0 °C
Yes A2SP Alarm 2 Switching point See table 1.5, 1.7 100,0 °C
Yes A2DV Alarm 2 Difference Low: -200,0 °C High: 200,0°C 10,0 °C
No RAMP Ramps rate Low: 0 High: 500,0 °C 0
Yes OFST
Offset value for
P control
Low: 0 High: 100,0 25
No REFC
Reference constant
for special functions
Low: 0 High: 60 2
Yes SHIF PV1 Switch back offset Low: -200,0 °C High: 200,0°C 0
Yes PB1 Proportional band 1 Low: 0 High: 500,0 °C 10,0 °C
Yes TI1 Integral time 1 Low: 0 High: 1000sec. 100
Yes TD1 Difference time 1 Low: 0 High: 360,0 sec. 25
Yes CPB Cooling proportional band Low: 1 High: 255% 100
Yes DB
Heating-Cooling Dead
Band / negative value =
overlapping
Low: -36,0 High: 36,0% 0
No SP2 Set point 2 See table 1.5, 1.7 37,8 °C
No PB2 Proportional band 2 Low: 0 High: 500,0 °C 10,0 °C
No TI2 Integral time 2 Low: 0 High: 1000sec. 100
No TD2 Difference time 2 Low: 0 High: 360,0 sec. 25
Yes O1HY Output hysteresis 1 Low: 0,1 High: 55,6 °C 0,1
Yes A1HY Hysterese-Alarm 1 Low: 0,1 High: 10,0 °C 0,1
Yes A2HY Hysterese-Alarm 2 Low: 0,1 High: 10,0 °C 0,1
No PL1 Limitation output 1 Low: 0 High: 100% 100
No PL2 Limitation output 2 Low: 0 High: 100% 100
Yes FUNC Setup menu catch
0 : Basic function
1 : all function
1
No COMM
Communication interfaces
selection
0 : No interface
1 : RS-485 interface
2 : RS-232 interface
3 : 4-20mA Retransfer
4 : 0-20mA Retransfer
5 : 0-1V Retransfer
6 : 0-5V Retransfer
7 : 1-5V Retransfer
8 : 0-10V Retransfer
1
No PORT Transfer protocol 0 : Modbus RTU 0
No ADDR Interface address Low: 1 High: 255 -
User
Menu
Setup
Menu