13
promesstec GmbH
I Niedersachsenstraße 4 I D- 48465 Schüttorf I Tel.:+49 (0)5923/ 90 229 0 I Fax:+49 (0)5923/ 90 229 29
E-Mail: [email protected] I Internet: www.promesstec.com
The menu lock can be used to restrict access to the parameters. Even when locked,
all parameters are displayed in the menu.
SEL1- SEL5 show the parameters enabled in quick access.
4.4 Buttons and display
The UREG200 controller is fully programmable via the front keys. The available key
functions can be found in the following table.
Key functions:
Key
Function
describtion
Button HIGH
Pressing once increases the parameter value by one digit.
By holding down the parameter value is quickly increased.
Button DOWN
Pressing once decreases the parameter value by one digit.
By holding down the parameter value is quickly decreased.
Button BLANK
Pressing takes you to the next parameter.
for 3 sec.
Enter button
Allows access to the "USER MENU", in various other
menus this confirms the entry or saves a value.
for 6 sec.
Start recording
Deletes the stored process values PVHI and PVLO and
starts the new recording of the process limit values.
simultaneously
Scroll backwards Pressing takes you to the previous parameter.
simultaneously
MODE
Press to select the operating mode.
simultaneously
RESET
Press to return to the operating display.
for 3 sec.
SLEEP Mode
The controller goes into SLEEP mode, but this must be
enabled in the menu item SLEP.
simultaneously
Internal setup
This menu item is only available for maintenance work
by promesstec.
Incorrect settings can cause the controller to behave
incorrectly!
