32
Promega Corporation · 2800 Woods Hollow Road · Madison, WI 53711-5399 USA · Toll Free in USA 800-356-9526 · 608-274-4330 · Fax 608-277-2516
TM321 · Revised 4/15
www.promega.com
6.A. Data File Transfer at the End of a Run (continued)
The
Transfer to PC
option allows the computer containing Maxwell
®
Sample Track to import data from the Maxwell
®
16 Forensic Instrument. When import is complete, the file name will appear in the lower left corner of the Maxwell
®
Sample Track software window, and the
Data Transfer
screen can be closed by pressing the
Run/Stop
button. The
imported file can be saved to the computer with a different name and in a different format (see the Maxwell
®
Sample
Track Technical Manual #TM314 for details).
The
option opens the
Select File
screen where files can be selected for printing.
8264T
A
Figure 30. Select File screen.
To print run data, ensure that the printer is set to receive data and is switched on. Select the file to be printed. You will
be notified that the file was sent to the printer. Once printing is complete, press the Run/Stop button to close the
File
Sent
screen.
6.B. Data File Transfer at a Later Time
Files may be exported at a later time using the
Data Transfer
option on the
Home
screen. Selecting this option opens
the
File Output
screen. Selecting
Transfer to PC
allows transfer as described in the previous section.
6.C. Data File Management
Files stored on the Maxwell
®
16 Forensic Instrument can be exported using Maxwell
®
Sample Track. This does not
remove the file from the instrument. To remove any unneeded files, use the
Data Transfer
option on the
Home
screen.
In the
File Output
screen, select
File Maintenance
, and enter the Administrator PIN. In the
Select File
screen the list
of files will be displayed. Select the file to be deleted, and press the forward arrow button. The file will be deleted after
confirmation.
7.
Changing Configuration Parameters
The instrument configuration can be changed at any time except during a run. In the
Home
screen, select
Setup
, which
opens the
Maxwell
®
16 Configuration
screen. Here you can choose the parameter that you wish to change.
