Promatic WDC Series, Manual

Page: 33 / 176

Service setting manual 33
ENG
User parameters are divided into the following groups: P1 - general settings, P2 - settings for
the first heating circuit, P3 - settings for the second heating circuit, P4 - settings for domestic
hot water, P5 - settings for boilers, and P6 - settings for alternative energy sources.
When you select the desired group of parameters in the menu, a new screen appears:
You can change the Settings by pressing the button .
The setting value will begin to flash. Now you can change it with buttons and .
Confirm the setting by pressing the button.
Now you can move on to another parameter with buttons and , and repeat the
procedure.
Exit the parameter settings by pressing the button.
All additional settings and adaptations of the controller's operations are performed with the
help of parameters. User, service and function parameters are available on the second menu
screen.
CONTROLLER PARAMETERS
USER PARAMETERS
In each group, only the parameters used in the selected hydraulic scheme can
be seen. Factory set values of parameter settings also depend on the selected
hydraulic scheme.
Parameter mark. Current parameter value.
Graphic display of
the setting.
Factory set value.
Last confirmed setting value.
Setting range.
Parameter
description.
SERVICE SETTING MANUAL
Current parameter value.