Promatic WDC Series, Manual

Page: 12 / 176

User manual 12
ENG
DESCRIPTION AND PRESENTATION OF THE BASIC SCREEN:
Review of data on the screen:
Operation mode and user functions appear separately for each circuit on the upper third of the
screen. To switch between heating circuits and the screen with the hydraulic scheme review
use the button.
Temperatures, active outputs, protection functions and other data appear in the middle section
of the screen. To review temperatures and other data, use buttons and .
The number of sensors and other data displayed on the screen depends on the selected hy-
draulic scheme and controller settings.
If you wish to retrieve the desired data after using the keyboard, look for the
data with buttons and , then confirm it by pressing the button
for 2 seconds.
Heating circuit.
Operation mode.
User functions.
Review of
temperatures,
protection
functions and
other data.
Time and
date.
Status of the controller's control outputs.
Messages
and war-
nings.
Review of
measured
temperatu-
res.
GRAPHIC LCD DISPLAY
On the LCD display we can look up all the important data for the controller operation.
Room unit.
If you press the button for 2 seconds, the temperature review will change
from a single line review into a double line review or vice versa. In the two-line
temperature review, the measured temperature appears in the first line, and the
desired or the calculated temperature appears in the second line.