Beta Draft Confidential
Remote Access Page
Basic Series Network Thermostat Configuration Guide, Release 3.0
3-39
Part No. 600-01000-201, Rev. 1
Use
Table 3-8
to complete the
Remote Access
page fields.
Table 3-8 Remote Access Page Field Descriptions
Field
Description
Alarm Notification
Remote Access
Controls whether the Remote Server service is enabled. Remote
access is the term used to describe the management and control
of the thermostat from networks outside the local subnet on
which the thermostat resides. Remote access provides the
thermostat with the ability to be controlled from either across the
Internet (with the Proliphix Web Server) or across multiple
corporate subnets to a private enterprise server.
Disable
(default) – Remote Server function is disabled.
Enable
– The thermostat is enabled to participate with a
Remote Server, either the Proliphix Remote Management
Server (See the
Proliphix Installer Remote Management
Guide
) or a private server, to provide remote access
capability.
Remote Server Configuration
Server Address
The IP address of the Remote Server, either the Proliphix
Remote Management Server or a private server which supports
remote access.
This field is pre-configured at the factory with
the IP address of the Proliphix Web Server.
207.58.145.109
– (default) Four field standard dot notation for
IP address designation.
Server Port
The outgoing IP port number which is used to communicate to
the remote server.
This field is pre-configured at the factory
with the IP port number of the Proliphix Web Server.
80
– (default) Port number of the remote server.
Interval
The time interval after which the thermostat intercommunicates
with the remote server to self identify itself as an active and
reachable thermostat. This interval is repeated continually as
long as Remote Access is enabled.
1 - 24 hrs
– Default interval is
1
hour.
