Beta Draft Confidential
2-8
Basic Series Network Thermostat Configuration Guide, Release 3.0
Part No. 600-01000-201, Rev. 1
CHAPTER 2: Configuring the Thermostat Using the TDI
Sensor Status Screen
The
Sensor Status
screen is a secondary screen on the Basic series models (if remote
sensors are installed and enabled) and the second primary screen if remote sensors are
disabled.
Figure 2-6 Sensor Status Screen
Table 2-4
lists the sensor status screen display options.
Note
The NT10e does not support external thermal sensors, therefore this screen is not
available on the NT10e Network Thermostat.
Table 2-4 Sensor Status Screen Options
Field
Displays
Zone Average
Average temperature of any combination of Local, Remote
Sensor #1 (e.g. East Entry), and Remote Sensor #2 (e.g. West
Entry).
Local
Current temperature of the sensor within the thermostat.
East Entry (e.g. RS #1)
Current temperature of Remote Sensor #1.
West Entry (e.g. RS #2)
Current temperature of Remote Sensor #2.
Sensor Status
Prev
Next
Cool
Zone Average 72.6
Local
72.3
Family Room 71.6
Dining Room 73.9