Beta Draft Confidential
3-4
Basic Series Network Thermostat Configuration Guide, Release 3.0
Part No. 600-01000-201, Rev. 1
CHAPTER 3: Configuring the Thermostat Using the TMI
Remote Management
You can manage the NT10e or NT20e Network Thermostat using a web browser on a
local area network (LAN) or remotely though the Internet after proper authentication
at the Proliphix Web Site (
www.proliphix.com
).
Logging In to the Thermostat
To establish the identity of the thermostat for Remote Management capability:
(See the
Proliphix
Installer Remote Management Guide
and the
Proliphix Remote
Management User Guide
for detailed information.)
1
Log in to the TMI as follows:
Username:
admin
Password:
admin
(default)
2
Access the
General Settings Page (page 3-13)
through the TMI.
3
Enter a
Device Name
and
Site Name
(for example, the name or location of the
property).
4
Click
Submit
.
5
Access the
Network Settings Page (page 3-27)
.
6
Set the
IP Address Method
to
Static
and select a unique
IP address, Subnet Mask,
Gateway
, and
HTTP port number
.
7
Click
Submit
.
8
Access the
Remote Access Page (page 3-38)
.
9
Click
Submit
.
Note
If you use a VPN to access your thermostats remotely, the thermostats appear to
reside on the “local” network. In this case, you do not need to control the
thermostats through the Proliphix Remote Management Service via the Proliphix
Web Site. If the Proliphix Remote Management Service is not used however, email
notification due to alarm conditions is
not
available.
