progeo MOTOTRONIK User Manual Download Page 7 | Manualshive

Page: 7 / 40

background image

Mototronik 7

7

INSTALLATION OF THE DEVICE

MOTOTRONIK devices supplied by Rehateam s.r.l. must be installed, adjusted
and verified in their functionality and safety only on compatible wheelchairs, only

by Rehateam s.r.l. or by specialised technicians authorised by Rehateam s.r.l.
who decide, under their own responsibility, whether the specific wheelchair can
ensure the correct and safe use of MOTOTRONIK.

Before delivering the device to the end user, the supplier delivering the device
itself must always make sure that the device is installed correctly and securely.

The supplier must also provide the user with the necessary instructions for the
correct use of the device.

Any  adjustments  and/or  any  modification  that  is  carried  out  by  non-authorised
personnel  will  immediately  void  the  warranty  on  the  product  and  will  relieve
Rehateam  s.r.l.  from  any  responsibility  for  any  malfunctioning  and/or  damage
due to such adjustments/modifications.

Making modifications to the device is forbidden.

You will find the instructions on how to properly install the device in MOTOTRONIK’s

SERVICE MANUAL that is available on the website www.rehateamprogeo.com

8

SAFETY: WARNINGS AND PRECAUTIONS

This User's Manual is an integral part of the device and must always be available to the user. If it is lost or damaged, contact Rehateam s.r.l.

Should anomalies occur during use such as to affect the safety of the user, the device must not be used and you should promptly contact the technical assistance of the dealer authorised by Rehateam s.r.l.

Non-original spare parts and accessories have not been tested by the manufacturer. Therefore, we cannot certify that these components are compliant with the necessary performance and safety requirements.
Rehateam s.r.l. is not responsible for any damage caused by using non-original spare parts or accessories.

Notify the manufacturer in the case of serious accidents that occur in relation to the device.
Manufacturer: Rehateam s.r.l., Vicolo Negrelli 5, 31038 Castagnole di Paese TV, Italia, tel. 0039 0422 484657, email: [email protected]

The user must read this document and have become familiar with its contents

before using the device. Rehateam s.r.l. disclaims all responsibility for non-
compliance with the content of this document.

During the initial period of use, the user must familiarise themselves with the
user guide to avoid potential risks caused by incorrect use.

If the device is not used in compliance with the specifications described herein,
the safety level specified by the manufacturer may be reduced.

EMC

–

The device is compliant with ISO 7176-21:2009 CLAUSE 5.4 on

electromagnetic compatibility, but to ensure the user's safety we recommend

not using this device in the presence of strong environmental electromagnetic
fields.
EMC

–

during its operation, this device can affect other devices with

electromagnetic fields.

«
...
5
6
7
8
9
...
»

Summary of Contents for MOTOTRONIK









































Reviews:

No comments

Related manuals for MOTOTRONIK

Brand: Abilize Pages: 22

Brand: Sunrise Medical Pages: 96

Brand: GO-ANYWHERE Pages: 21

Brand: Otto Bock Pages: 36

Brand: Pride Pages: 2

Jazzy 1107 INFINFB2041

Brand: Pride Pages: 4

Brand: Pride Pages: 11

Brand: Pride Pages: 20

Brand: Pride Pages: 33

Brand: Decathlon Pages: 183

Brand: Power Plus Mobility Pages: 11

Jaco Rehab Edition

Brand: Kinova Pages: 31

Brand: PaceSaver Pages: 44

Brand: Permobil Pages: 47

Brand: Innovate Pages: 18

Brand: Rehab and Mobility Products Pages: 4

Quantum Q6 Edge 3MP

Brand: Pride Mobility Pages: 43

Brand: Abilize Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands