Mototronik 14
10.3 Battery charger and charging
To charge the battery, proceed as follows:
Press and hold pressed the button "
M
" until the device switches off
–
see chapter 12.3.
Remove the battery, see chapter 10.2.
Flip the protection cap
A
.
Connect the plug
B
of the battery charger to the socket of the battery.
Connect the battery charger plug to the 100-240V 50Hz power supply.
The LED light on the upper side of the battery charger indicates the status:
No light: disconnected
Red: charging;
Flashing Red: problem, see charger manual.
Green: charging finished, battery is fully charged.
Once the charging is complete, disconnect the plug from the power supply first, and then the battery charger plug from the battery.
Battery charging time (starting with a completely discharged battery).
We suggest keeping the battery charger away from heat sources, in a dry place and protected from sun rays.
•
48V 11.6 Ah
(556.8 Kw/h)
5
h
00'
•
48V 5.8 Ah
(278.4 Kw/h)
2
h
30'
•
48V 2.9 Ah (Fly) (139.2 Kw/h)
1
h
15'
100-240V 50Hz
A
B
L
