Mototronik 20
11.4 Removing the connection frame
Once the motor unit is detached, loosen the two levers
A
just enough to be able to pull off the connecting frame
E.
Slide the connection frame off.
The two levers can now be screwed and attached to the half-moon-shape blocks
C
or they can be removed and stored in the most practical and/or appropriate location (for example, in the seat canvas pocket).
This operation can be carried out both with a braked wheelchair and with a wheelchair that does not have the brakes on.
11.5 Removing the motor unit coupled to the connection frame
You can also detach the "motor unit/connection frame" assembly in a single quick operation. Stop the wheelchair with its own parking brakes.
Loosen the two levers just enough to be able to remove the connection frame as indicated in the previous chapter. Now, at the same time, push the handlebar forward and move the body backwards several times
but gently as if you were trying to do a wheelie until you detach the "motor unit/connection frame" assembly.
Perform this operation very carefully to avoid unbalancing or even falling off the
wheelchair.
This operation, although possible and expected, wears more on the coupling forks and
half-moon-shape blocks. Please note that the warranty does not apply to parts subject
to wear and tear.
E
A
A
