37
6 Set up with the display and adjustment module PLICSCOM
VEGASON 62 • Profibus PA
28785-EN-150603
With the reset function, modified values are reset. Three subfunctions
are available:
•
Basic adjustment
–
Reset the values modified with the display and adjustment
module to the sensor-specific basic setting
•
Default setting
–
As basic adjustment, but also reset of special parameters to the
default values
2)
•
Peak values measured value and temperature
3)
–
Reset of the min./max. values of pressure, level and tempera
-
ture to the current values
Information:
Because the reset values are nearly sensor-specifc, they are listed in
the operating instructions manual of the respective sensor.
Reset
Select reset?
In this menu item you select the internal arithmetic unit of the sensor.
Unit of measurement
m(d)
The sensor is already set to the ordered national language. In this
menu item you can change the language. The following languages are
available, e.g. in software version 3.50:
•
Deutsch
•
English
•
Français
•
Espanõl
•
Pycckuu
•
Italiano
•
Netherlands
•
Japanese
•
Chinese
Language
German
This function enables reading out parameter adjustment data as well
as writing parameter adjustment data into the sensor via the display
Reset
Service - Adjustment unit
Service - Language
Copy sensor data
2)
Special parameters are parameters which are set customer-specifically on
the service level with the adjustment software PACTware.
3)
Temperature only with pressure transmitters and ultrasonic sensors.
