32
6 Set up with the display and adjustment module PLICSCOM
VEGASON 62 • Profibus PA
28785-EN-150603
Linearisation curve
Linear
Enter the requested parameters via the appropriate keys, save your
settings and jump to the next menu item with the
[->]
key.
The channel is the input selector switch for function block (FB) of
the sensor. Within the function block, additional scalings (Out-Scale)
are carried out. In this menu item, the value fir the function block is
selected:
•
SV1 (Secondary Value 1):
–
Percent with radar, guided microwave and ultrasonic sensors
– Pressure or height with pressure transmitters
•
SV2 (Secondary Value 2):
–
Distance with radar, guided microwave and ultrasonic sensors
– Percent with pressure transmitters
•
PV (Primary Value):
–
Linearised percentage value
Channel
PV lin. value
In this menu item you can enter an unambiguous designation for the
sensor, e.g. the measurement loop name or the tank or product des
-
ignation. In digital systems and in the documentation of larger plants,
a singular designation should be entered for exact identification of
individual measuring points.
Sensor-TAG
Sensor
With this menu item, the Basic adjustment is finished and you can
now jump to the main menu with the
[ESC]
key.
Menu section, display
Radar, guided microwave and ultrasonic sensors deliver the following
measured values:
•
SV1 (Secondary Value 1): Percentage value after the adjustment
•
SV2 (Secondary Value 2): Distance value before the adjustment
•
PV (Primary Value): Linearised percentage value
•
PA-Out (value after passing the function block): PA output
A pressure transmitter delivers the following measured values:
•
SV1 (Secondary Value 1): Pressure or height value before adjust
-
ment
•
SV2 (Secondary Value 2): Percentage value after the adjustment
•
PV (Primary Value): Linearised percentage value
Grundeinstellung - Chan-
nel
Basic adjustment - Sen-
sor TAG
Display - Displayed value
