Prodys PortaNet, User Manual

Page: 51 / 156

PortaNet User Manual 51 of 156
Base Port : By default, it is 50011 for TCP and UDP ports. This is the first port
of the range of ports used by the unit. From this base port on, up to 30 ports
should opened/forwarded. That is, if the base port is set to 50011, the range of
ports goes from 50011 to 50041, both for UDP and TCP, should be
opened/forwarded in the corresponding router/firewall (when required).
IMPORTANT
The following should be taken into consideration when changing the web
port:
To access the web page of the unit, the new port has to be indicated in
the http address bar of the web browser after the IP address, separated
by a colon:
http://<IP>:<Port> Example: 192.168.0.10:8080
VIII.2 General configuration
By clicking on the ‘Conf’ key the user can access the general configuration
window. The different options are arranged in the following way:
Interfaces
: To configure the PortaNet Ports.
Audio : Different options regarding audio configuration can be set from this
menu: remote audio input level control, headphone output configuration or
audio presets for example.
Sys
: System configuration: clock, keypad locking...
Book
: To edit the phone book.
Scheduller
: To schedule calls.
Advanced
: Special options.
Streaming
: To configure IP related parameters and to test the quality of the
IP connection between units.
VIII.2.1 Interfaces
By clicking on the
Interfaces
icon the port configuration dialog appears. In the
left side the ports can be selected. The right window shows the window dialog to
configure the selected port. For example, if we select the LAN interface:
VIII.2.1.1 LAN port
PortaNet allows the assigning of the IP parameters both manually and
automatically (DHCP).
Manually User must enter the following IP parameters manually:
4. IP address.
5. Mask.
6. Gateway IP address