Prodys PortaNet, User Manual

Page: 39 / 156

PortaNet User Manual 39 of 156
VII.10.1.1
Establishing a call when PortaNet is configured as an IP
Unicast/Multicast codec
Pressing CALL 1 the screen will display the following:
The user must select which kind of communication will be used:
Unicast Bidirectional This is a bidirectional point to point connection,
that is, both ends will transmit and receive audio simultaneously. It will be
necessary to check the upload and download bandwidth on the link.
Unicast Unidirectional Tx This is a unidirectional point to point
communication where only the end which makes the call will send audio.
Unicast Unidirectional Rx This is a unidirectional point to point
communication, where the calling end will be the receiver.
Multicast Tx This is point to multipoint communication in which the
calling end will join a multicast group as a transmitter.
Multicast Rx This is point to multipoint communication in which the
calling end will join a multicast group as a receiver.
Next, depending on the selected option will show:
MULTICAST
L A N L 1 M O D E
{ M U L T I C A S T } U N I C A S T
L A N L 1 M O D E
{ M U L T I C A S T } U N I C A S T
L A N L 1 M O D E
{ T x } R x
L A N L 1 D I A L
2 2 4 . 0 . 0 . 2
O
K
O
K