Prodys S.L. Tel: +34 91 6896880
Θ
Fax: +34 91 6943777
Θ
Email:
Θ
Web:
www.prodys.com
Page 110
UDP 50037
: P-AUXP Auxliary Data (from version 4.8.0 on) (v1,v2): This
port is used to carry the Auxiliary Data in case the unit is configured to
send this data outside the audio frame.
UDP 50039
: P-UbP U-BITs (from version 4.8.0 on) (v1,v2,v3): This port
is used to carry the User bit of the AES/EBU frame when the AES/EBU
audio input with U-Bit is selected as audio input source.
TCP 51000
: P-RTCP (Control) (Only in V3): This port is used to control
any IP audio streaming communication in Prodys Proprietary Protocol V3.
This port can be disabled when selecting Prodys Proprietary Protocol V3 as
Streaming Protocol. In case this protocol is disabled, there will be a lack of
control in the status of the connection at the far end.
UDP 51000
: P-RTP Unicast L1 & Auxiliary Data (Only in V3): This port is
used to carry the audio data and auxiliary data over IP for unicast
communications on line 1 in Prodys Proprietary Protocol V3. Both audio
and auxiliary data are multiplexed into the same stream in Protocol V3.
UDP 51001
: P-RTP Unicast L2 & Auxiliary Data (Only in V3): This port is
used to carry the audio data and auxiliary data over IP for unicast
communications on line 2 in Prodys Proprietary Protocol V3
21
. Both audio
and auxiliary data are multiplexed into the same stream in Protocol V3.
UDP 5060
: SIP port (SIP): This port is the default port defined by the SIP
standard. This port carries the data for call flow control.
UDP 5004
: RTP port (SIP, RTP): This port is the default port defined by
the RTP standard. It carries the audio data over IP for unicast
communications when SIP or RTP are selected as Streaming Protocols.
21
Line 2 over IP is only available in ‘double mode’.
Summary of Contents for IP Family
Page 1: ...Nov 08 Rev 6 0...
