Prodys S.L. Tel: +34 91 6896880
Θ
Fax: +34 91 6943777
Θ
Email:
Θ
Web:
www.prodys.com
Page 69
From this window, the user can know beforehand, the bandwidth and delay of
the connection.
So, the ‘Time Between Packets’ parameter, is directly related with the packet size
and therefore with the occupied bandwidth (overhead) and delay. Therefore, the
appropriate value for this parameter is a trade off between delay and bandwidth:
The larger the block size (TBP), the higher the delay, but the smaller
the required bandwidth and overhead (more efficient use of IP
packets), and vice versa.
If there is no delay requirements in the connection, it is always advisable to
select the highest value, since bandwidth will be smaller. Also, the more frames
over the network (with small TBP values, frames decrease in size and increase in
number), the more likely it is that the jitter will grow.
Summary of Contents for IP Family
Page 1: ...Nov 08 Rev 6 0...
