Prodys S.L. Tel: +34 91 6896880
Θ
Fax: +34 91 6943777
Θ
Email:
Θ
Web:
www.prodys.com
Page 109
Test Streaming Tool: This is an application built into the web page to
measure the quality of the connection: bandwidth, delay, jitter, packet
loss and packet disorder. In case of trying to measure these parameters
between two units with firewalls in between, these ports should be
opened/forwarded to the corresponding IP codecs.
External Protocol (P-XP)
TCP 50031
: Control Port
TCP 50035
: Status Port
The external protocol allows the user to build its own management
application based on commands either via the serial port or via the IP
interface. These commands are defined in the ProntoNet SDK User Manual
available on the Prodys Web under the ‘Downloads’ section.
V.6.11.2.
Streaming and Audio Control Ports
TCP 50019
: P-RTCP (Control) (v1,v2): This port is used to control any IP
audio streaming communication with Prodys Proprietary Protocols V1 or
V2.
UDP 50021
: P-RTP Unicast L1 (v1,v2): This port is used to carry the
audio data over IP for unicast communications on line 1 with Prodys
Proprietary Protocols V1 or V2.
UDP 50023
: P-RTP Unicast L2 (v1,v2): This port is used to carry the
audio data over IP for unicast communications on line 2 (only available in
double IP mode) with Prodys Proprietary Protocols V1 or V2.
UDP 50025
: PX-RTP Multicast L1 (v1,v2,v3): This port is used to carry
the audio data over IP for unicast communications on line 1 with Prodys
Proprietary Protocols V1, V2 or V3.
UDP 50027
: PX-RTP Multicast L2 (v1,v2,v3): This port is used to carry
the audio data over IP for unicast communications on line 2 with Prodys
Proprietary Protocols V1, V2 or V3.
Summary of Contents for IP Family
Page 1: ...Nov 08 Rev 6 0...
