Prodys S.L. Tel: +34 91 6896880
Θ
Fax: +34 91 6943777
Θ
Email:
Θ
Web:
www.prodys.com
Page 80
this case, the alarm will indicate the date and time when the decoder lost the
synchronization, that is, when the unit was turned off. The alarm will be
activated until the unit is framed once the line is connected again. If the
connection is not possible, the alarm will be marked as finished.
Decoder 1/2 Not Framed
: The Line is connected but the decoder is not
framed. This new alarm doesn’t require that the decoder was framed
previously. For this reason, it is necessary to specify a window time to decide
when the alarm will be activated once that the NOT FRAMED condition has
been detected.
Otherwise, the alarm would come up as soon as the connection is
established, given that the Decoder needs some time to detect the incoming
compression mode.
Line Disconnected
: Line 1/2 has been disconnected unexpectedly,
manually disconnected or both.
Backup Active
: The ISDN backup line is working.
General
: In internal hardware error was detected by the software.
System Power Down
: This new alarm allows the user to know if the unit
was turn off and the time that it remained in that condition.
Summary of Contents for IP Family
Page 1: ...Nov 08 Rev 6 0...
