ProCurve 10ag, Installation And Configuration Manual, Page: 73 / 132

5-5
Managing the Access Point
Updating the Access Point Software
If You Forget Your Password
If you forget your password, you will need to reset the access point to factory
default, and then log back on to the access point using the default user name
(
admin
) and password (
password
).
For detailed information, refer to “Restoring Factory Default Configuration”
on page 6-6 .
Updating the Access Point Software
The software update function allows you to install on the access point any
new access point software that HP may release. To install the new software,
you will first need to download the software from the HP Web site to the
management computer.
Before performing a software update, take note of the current software
version (shown on the Information page). The software version is shown as
WM.XX.XX, where XX.XX is the version number (for example, WM.01.02). You
need to know this to be able to verify that the update has been completed
successfully.
Where to Download Software Updates
The ProCurve support site periodically provides access point software
updates through the ProCurve Web site (
www.procurve.com ). At
www.procurve.com , select “Software updates”. Under “Latest software”,
select “Wireless access points”. Check for available software updates for
ProCurve Wireless Access Point 10ag.