ProCurve 10ag, Installation And Configuration Manual, Page: 38 / 132

3-6
Getting Started With Access Point Configuration
Default Configuration Parameters
Default Configuration Parameters
Table 3-2 lists some of the default settings with which the access point is
configured, including the basic IP address and wireless configuration param-
eters. Information on how to update each parameter is provided later in this
guide.
Table 3-2. Default Parameters
Parameter Default Description
Username admin The name of the manager.
Password password The password for the manager.
IP Address 192.168.1.14 IP address compatible with your network.
Subnet Mask 255.255.255.0 Subnet mask compatible with your network.
Default Gateway not set IP address of the next-hop gateway node for network traffic that needs
to be able to reach off-subnet destinations.
Radio Mode 802.11 b/g The default radio mode.
Radios Disabled Both radios are disabled.
SSID wireless-g A pre-configured Service Set Identifier (SSID), also called a wireless
network name.
Note: The IP address and subnet mask assigned to the access point must be compatible with the IP addressing used
on your network. For more information on IP addressing, see “Configuring Basic Settings” on page 4-1 .