Jetzt Angebot anfordern auf www.poolseller.de
»
NOTICE DE MONTAGE
/ OCTO & OCTO +
58
>>
ASSEMBLING AND COMMISSIONING THE FILTER GROUP
Before you continue to fill the pool, assemble the filter group. Refer to the sand filter installation instructions
and the pump operating instructions. Study the filtration system diagram and the table opposite that lists the main
components and the composition of the various packs.
CAUTION ! ! ! The pump power supply absolutely must be protected by a 30 mA differential circuit breaker
mounted upstream from the installation.
Similarly, follow all the installation instructions set out in the manuals enclosed with the underwater light and the
control panel.
The filtration system, like every other electrical device, must be wired in in accordance with the standards in effect in
the country of installation (C15-100 in France).
Do not hesitate to call on the services of a professional to guarantee the compliance of your installation.
We strongly recommend that you install the filter below the water level. If the filter is installed above the water line, there
is a risk of deformation due to depresssurisation. The maximum allowed is level with the coping. In the event that the
filter is installed above the water line, a check vent must be mounted on the return line and an inspection check valve
must be mounted on the suction line (these items are available from any pool specialist).
351493
351848
»
INSTALLATION INSTRUCTIONS
/ OCTO & OCTO +
Jetzt Angebot anfordern auf www.poolseller.de