METIS Vision MV05
/ MV09 Rugged Thermovision Camera
27
After a short time (less than a minute) a connection
with the camera will be set up. Please choose the
suitable camera if more than one camera is shown
and end the software by saving the settings when
asked.
Metis Vision camera is aimed onto hot target, b/w pictures should be shown now
Now you should be able to see thermografical pic-
tures with
VisionWin
also.
By starting up the
VisionWin
software for the first
time you will be asked for a calibration file. You will
find it on CD/DVD. The ending of this file will be
.abg
. Please see VisionWin software manual.
7.3.2.2
SDK driver components of the camera
Please note that only the RunTime part of the SDK shall be installed during installation. You
will find a development installation in the CD/DVD directory CVB11.0 if you want to write
your own software for the camera operation. By purchasing the camera and the license key
these components may be used.
You will find components and programming examples for programming languages (Visual C,
Delphi, Visual Basic) in the installation directory. Please note that for Delphi only up to Del-
phi 2007 is supported. If Delphi 2009 is used little changes for Unicode support have to be
made in the Header files. In the directory „interfaces for CommonVisionBlox SDK and Delhi“
on the CD/DvD you will find, besides a selection of sample applications for the camera driver
and calibration-DLL, prepared header units for Delphi 2009 (unicode support) and for Delphi
7 (without Unicode).
