Operating Instructions
TM-150-D-A-XL
Maintenance and care
44 / 47
V1
GB
●
Remove the covering and grease with
lubrication gun.
●
Check air filter for dirt
All 50 operating hours
●
Tighten all screws and connections (take care that the tightening torques according
to the property class of the screws are observed).
●
Check all joints, bolts, guidance’s and gears for correct function, if necessary adjust or
replace it.
●
Check all Grippers ( if available) for signs of wear.
●
Grease all slidings ( if available) when the device is in opened position with a spatula.
Minimum 1x per year
(at rough conditions shorten the
interval)
●
Check of all the suspension parts, bolts and straps. Check for corrosion and safety by
an expert.
Pos: 22 /07 Wart ung und Pfle ge/ 03 Re paratur en/ Ü_R eparat ure n @ 0\m od2 4_2.doc @ 7277 @
